Increased safety, with two internal weld seams and two external weld spots at the strap anchorage point on the support.
- 2mm Mild Carbon Steel, Phosphated, and with 800 micron Poly-amide coating.
- This clamp is fully assembled with 2 M12 DIN984 or M12 DIN980 Nuts
- Carbon Steel with 800-micron Polyamide coating point on the support.
- Assembled with 2 Standard M10 Nuts
- Carbon Steel with Black Powder Coating or Trivalent Zinc Plating
- Each clamp packed individually in a poly-bag
- Fitted with EPDM Rubber
- Assembled with 1 M12 Nut and 1 M12 Washer
- Thickness - 2mm
- Available in Zinc Plating or Available in 800-micron Polyamide Coating
- Sold unassembled as a kit, with channel and strap in a plastic bag.
- Sold with two M12 Nuts, 1 M12 Nylock Nut, and 1 M12 Flat Washer
- These clamps enable a 50% reduction in transportation volume.
- Assembly instructions are provided.
- Carbon Steel with 800 micron Polyamide Coating
- 4mm thick carbon steel with 14mm hole
- Sold individually, not assembled, with two M10 nylock nuts and two M10 plain washers
- Carbon Steel with 800 micron Polyamide Coating
- M8 "U" for Aluminium Tanks and M10 "U" for STEEL Tanks
- 4mm thick carbon steel with 14mm hole
- Sold individually, not assembled, with two M10 nylock nuts and two M10 plain washers